Description

Color Chips: The color chips are simulations of Wilflex colors. Slight variations may be seen between these chips and actual Wilflex inks. Printed results may vary based on production methods such as ink film thickness, opacity, and substrate.

• CLICK HERE FOR PRODUCT INFORMATION BULLETIN

• Mix with Wilflex™ PCs or EQualizers
• Low cure, save energy, reduce bleed defects
• Good bleed resistance, reducing the need to underbase on polyesters
• Semi-opaque to opaque colors
• Good color fastness to crocking test
• Use consistent, high-tensioned screen mesh and sharp edged squeegees for best print results
• When blended according to formulations, colors will be semi-opaque to opaque
• Exhibits good color reproduction on white garment and over a base plate. For some colors, base mixing systems are limited in color saturation and may require an increased ink deposit or formula adjustment to achieve accurate color
• Use a printing technique to assure a good ink deposit to maximize bleed resistance and film strength properties
• Performance Base is a low bleed mixing base. For challenging fabrics using sublimation dyes, a bleed blocking underbase such as EPIC ARMOR LC may be required
• Adjust flash cure temperature and dwell time so ink is just dry to touch. Depending on flash unit, a 2 – 3 second flash is adequate
• Curing is a time and temperature process, a lower oven temperature setting with a slower belt speed while maintaining recommended ink cure temperature is always best to protect fabric, control dye migration and reduce energy consumption