Description

FO20047249Z1 19000 EPIC RIO RFU BLACK DIAMOND

Color Chips: The color chips are simulations of Wilflex colors. Slight variations may be seen between these chips and actual Wilflex inks. Printed results may vary based on production methods such as ink film thickness, opacity, and substrate.

• CLICK HERE FOR PRODUCT INFORMATION BULLETIN
• RIO RFU Colors can be cured between 266°F – 320°F (130°C – 160°C)
• Excellent color reproduction using 160-305 t/in (62-120 t/cm) mesh on white, light garments and over a base plate. Use finer mesh and save ink without sacrificing color accuracy.
• For best results on non-woven polypropylene bags, single print using 110-160 t/in (43-62 t/cm) mesh with a 60 or 70 single durometer squeegee
• RIO RFU Colors are not a low-bleed inks; *when printing on fabrics that are prone to bleed underbase with an approved WILFLEX low bleed white and/or blocker
• Exhibits good color retention in high-speed wet-on-wet production with minimal build up. Use 230 mesh or higher for best wet-on-wet printing.
• Adjust flash cure temperature and dwell time so ink is just dry to touch. Depending on flash unit, a 2 – 3 second flash is adequate
• For cold-peel transfers, use a coated release paper or polyester film. Print colors using 70 duro squeegee and 110-230 t/in (43-91 t/cm) mesh followed by powdering. Gel at 212°F (100°C) for 60 sec. Apply transfer with heat press at 300°F (150°C) for 10-12 sec at medium pressure. For transfers on polyester, back with a low bleed white and/or blocker. Verify process.
• Use ASI K2920 FINESSE to extend the ink for blending colors in halftones or when garment colors allow ink opacity to be decreased. Suitable for use at 270°F (132°C)
• Popular industry colors, ready for use saving time to mix
• Opaque colors. Excellent color reproduction over base plate and white, light garments
• Best color fastness
• Low cure, save energy
• Wet-on-wet printing at high production speeds with good resistance to build-up
• Matte finish